Evidence of safety,health and the environment

First : Policy

Company is committed to the following:

1 - the provision of appropriate personal protective equipment and instructions for company employees
2 - testing of emergency
3 - the availability of safety information, health and environment for all employees
4 - requiring workers to attend meetings of safety, health and the environment
5 - forcing employees to act to reduce or avoid the risk of injury or damage to the environment or property


The aim of this policy to make sure that all employees of the company have the means of adequate protection from environmental elements and the risk of site work related due to the inability to reduce exposure to those risks are moderate through the application of engineering controls or applications process as it aims to reduce the effects of potential emergencies on the lives of people and the environment and property of the company and the holding of meetings of effective health and safety and the environment, and instill a sense of safety and security work to prevent injuries or damage which may affect the environment

Scope of Work:

This policy includes all employees of the company regardless of their jobs and all workers should be urged to commit and participate in this process.


First, personal protective equipment
The company is committed to workers to wear personal protective equipment and should be held for the maintenance process sensitive personal protective equipment by highly qualified and authorized workers and will be available if the means of protection or personal protective equipment as follows:
- Appropriate task
- Suitable for the wearer and the work environment by the content
- In good condition
- Appropriate for use and worn by the person who trained to use it properly


must ensure that the staff training administration on the use of personal protective equipment and should cover theoretical and practical training for the use of personal protective equipment

Head protection:

Should be wearing all the Worlds helmets outside their residence at all times except for designated areas, which allows the area manager not to wear a helmet, and must be placed signs in these places so that it refers not to the need to wear a helmet in this topic area, and helmets must be court linked at work at a height of two meters or more or as circumstances require, and helmets must be
- Installed tightly in the head through the bottom of the chin belt or audio condoms 
- Designed in a way as not to impede the cover ears or wear a protective face or both
- Made of a non-conducting material for electricity and are worn in accordance with the recommendations of the company designed
- Be appropriate for each helmet ligament on the person alone without being modified.


Ears protection:

Workers should wear ear protectors in appropriate areas with a high degree of noise which exceed 83 dB (unit of measurement of sound) and must adhere to the signs on these areas to identify areas of high noise

Eyes protection:

all employees should wear safety glasses, which contain two parts on both sides outside the presence of residence except for areas that allow the area manager not to wear the glasses
Workers should wear protective glasses or protective face with glasses and safety according to the following:
- During the practice of any activity such as cutting and pipe wrench to change and do not use a gun, who works washing and high pressure in order to protect the eye from the rush of any foreign body
- When dealing with products that cause erosion, or which may cause damage or if the task requires protective eye wear
Allows the use of contact lenses, except for areas filled with dust and smoke and when you wear a respirator and personnel who are welding or where assistance, with the obligation to inform supervisor to wear contact lenses, glasses and a commitment to secure a reserve

Clothing requirements:

• You must wear appropriate clothing that achieve the personal safety and to ensure protection of the individual elements of the various environmental and must be all the clothes are supported regionally, and prohibits the wearing of jewelry, which pose a threat to safety at work such as rings or ligaments metal for watches or bracelets or chains or medallions
• You must wear allowance made ​​of wax to protect workers from exposure to risks that cannot be avoided by using the Overall like a child other oil and fluids and heavy rain
• Do not allow zero-sleeve dress in the kitchen or catering hall
• not allowed to wear loose fitting clothes that may Meshing equipment
• You control the safety and health risks associated with long hair by wearing hats, which pack the hair in place
• You must wear protective aprons or jackets when dealing with corrosive substances or substances harmful to the body
• You must wear life jackets or flotation equipment when working directly on the water


Must be designed overalls or work clothes consisting of two pieces of cotton or flame resistant material and must be proved reflector tape on the overalls and work clothes consisting of two pieces and are usually placed above the shoulders and lower on the measure of the arms and legs
Work wear must be also be used to fit the size worn by the person who will be fixed that the provisions of, and must be returned after use to storage containers for specific posters


Hands protection:

Must wear gloves made ​​of (cloth - rubber, leather, etc.) to protect your hands by type of risk as possible be exposed hands and should not be wearing gloves is made ​​of Sbstos which bear high temperatures when dealing with the hot parts of equipment

Feet Protection:

Workers should wear shoes long neck (bots) or a short neck shoes equipped with a metal lid to protect fingers during a presence outside the places allocated for the establishment of areas with the exception that allows the director of the region was not necessary to wear feet protector.

Respiratory protection :

Must wear the proper equipment to protect the respiratory system, and must wear a breathing air cylinder with a positive pressure breathing apparatus or supplied drum to escape in case of exposure to the atmosphere immediately dangerous to health or at the low rate of oxygen in the air for 19.5% 
Escape and breathing devices must be 
• in a place easily visible 
• stored and protected against dust and sunlight, heat, and standard conditions and excess moisture and harmful chemicals 
• suitable for use in toxic atmospheres and atmospheres with low oxygen 
• must include every site on the cylinders with air breathing and positive pressure respirator equipped with oxygen to escape, according to the following 
- 12-30 minutes of breathing air cylinders (type of positive pressure)
- From 6-10 minutes, escape devices (type positive pressure) 
Individuals be specialists alone are responsible for the process of replacing the breathing air cylinders or repaired using parts assigned to them, may not be substituted for organizations or repaired only by the manufacturer or its authorized agents 

Second: The Emergency Response

Emergency response policy aims to reduce the effects of possible emergencies on the lives of people and the environment and property of the company and include all work sites and offices of the company.

Manuals for emergency response

Must put the work site and office plans and procedures for a private emergency response to emergencies that occur on the site

Emergency Response Guide

Designed measures of emergency to ensure the presence management team sites as soon as possible to the incident in order to provide the necessary support required by the emergency site, in addition to that you must have one source of information in order to manage the incident at the highest possible level of efficiency with particular attention to inform staff and relatives.
And must include evidence that the emergency measures to deal with the following cases of emergency or at the office site:
- Personal injury.
- Fire.
- Environmental incident.
- Vehicle accident.
- State of emergency in the area or other place.


Experience and training emergency response

Emergency response procedures should be held for experiments in the following specific periods of time

Procedures for testing and training

All employees should wear appropriate clothing of the experiences of emergency response and must include at least the following:
- Long Trousers
- Children (and recommend using a long-sleeved shirts)
- Foot-wear strong safety
The director of the entity responsible for the employees to wear helmets or shoes or glasses when necessary to reduce the risk of injury to workers.

Third, health, safety and environment information

Individuals should see the warning bulletins and discuss how the occurrence of a similar incident in the facility or work site must also director of the

region following:

Mapping of places of danger and it applies to restrictions on access or on use of equipment and that this map are available at all work sites
- Develop information tools for health and safety, where you must provide a safety posters and flyers for weekly services, safety, health and the environment
- Develop a bulletin board quality, health and safety and the environment
- Urging the workers to provide substantial benefit and opportunities for the patch in relation to aspects of health and safety and the environment, using the model of quality, health and safety of the environment to benefit

Meetings of the Safety, Health and Environment

A policy requiring all employees of the company to participate in the meetings of the safety, health and the environment in order to achieve the performance of an effective health and safety, the environment and increase the awareness of all individuals with the instructions of health and safety, the environment and the safety of operation and which is in the following
- Safety behaviors, where the call on the workers not kidding hands at work sites or offices at any one time
- The limits of operational safety, where the company determines the limits of safety for each operating system and stomach, which should not be exceeded, and also maintain the equipment in a manner allowing the implementation of the task within the limits of safety
- Preview of the workplace in which the things are falling, where you may view any area of ​​the fall of that stuff and at periodic intervals to ensure the secure range condition
- Commitment to the use of codes after bare as much as possible, using alternative means
- Personnel training, so be on the full knowledge of work safety-related hand tools, which includes
• the correct use of appropriate tool to work
• Inspection of tools before use to ensure suitability for the work
• Secure tools in an appropriate manner when you do work in high places
• Do not make any amendment to the equipment
• Clean and store tools when working out.
•Training the employees company on the correct use of mobile ladders


All employees

The responsibility of safety health and environment to all workers in terms of wearing clothes that provide them with safety and health, see bulletins serious injuries and warning bulletins and staff should also attend meetings of safety, health and the environment and also act in a manner suitable to protect themselves and others
Director of the Foundation

The Director of the Foundation license for workers qualified maintenance of :

personal protective equipment sensitive :

- Ensure an annual test for the detection of safety breathing air cylinder
- Ensure the availability of sufficient quantities of personal protective equipment
- Ensure the distribution of health and safety information and the environment
- Issuing instructions for the safety and health and the environment.